公司动态

二级分类：

超声波清洗机分体式组成

超声波清洗机   
   超声波清洗机分体式结构的组成_济南洁升超声波清洗机
1. Cleaning cylinder, most of the workpieces can be installed in the mesh frame first. The cleaning cylinder is used to load the cleaning liquid and the stainless steel container to be cleaned, and then put together in the cylinder for cleaning.
2, ultrasonic generator, from the types of components used can be divided into electronic tube type thyristor and transistor type has been developed in recent years to use high power \u0026 ldquo ^ fen ^ power module \u0026 rdquo ^ fen ^ mode. The output power is from tens of watts up to several kilowatts, the ultrasonic generator for ultrasonic cleaners, operating frequency from 15kHz40kHzo
1、清洗缸，大多数工件可先装在网状框架内，清洗缸是用来装载清洗液及被清洗工件的不锈钢容器，再一起放人缸内清洗。
3, ultrasonic transducer, a cleaning machine with multiple transducers, generally composed of two piezoelectric ceramic wafers. A transducer bonded to the bottom of the cleaning cylinder via an adhesive and coupled in parallel to form a cleaning machine. The distance between the tra超声波清洗机价格nsducer elements is generally 5\u0026mdash;10mm for the frequency of 20kH4. It is too large to cause bending vibration, and the vibration plate is corroded, and the radiation surface is relatively reduced.

上一条:超声波清洗设备正在增加功能 下一条:超声波清洗机的工艺流程介绍 返回列表