超声波清洗机清洗液的应用作用
超声波清洗机清洗液在诸多方面的应用作用_济南洁升超声波清洗机
Ultrasonic cleaning machines are usually pre-cleaned by dipping, spraying, etc., to clean a large amount of dirt. After removing most of the dirt, the remaining dirt is ultrasonically cleaned, and the effect is good. If you clean small items and complicated shapes (parts), if you use a cleaning net or rotate the cleaning object, you can use ultrasonic radiation while vibrating, and you can get even cleaning.
超声波清洗机水清洗液最适宜的清洗温度为40-60℃，尤其在天冷时若清洗液温度低空化效应差，清洗效果也差。因此有部分超声波清洗机在清洗缸外边绕上加热电热丝进行温度控制，当温度升高后空化易发生，所以清洗效果较好。当温度继续升高以后，空泡内气体压力增加，引起冲击声压下降，反应出这两因素的相乘作用。
Ultrasonic cleaning machine has good cleaning effect, high cleanliness and consistent cleanliness of all workpieces. The cleaning speed is fast, the production efficiency is improved, and the cleaning liquid is not required to be touched by human hands, which is safe and reliable. Deep holes, slits and hidden parts of the workpiece can also be cleaned. No damage to the surface of the workpiece, saving solvent, heat, work site and labor.
超声波清洗机清洗大量污垢的零件一般要采用浸、喷射等方法进行预清洗。在清除了大部分污垢之后，再用超声清洗余下的污垢，则效果好。如果清洗小物品及形状复杂的物品（零件）时，如果采用清洗网或者使清洗物旋转，边振动边用超声辐射，能得到均匀清洗。
Ultrasonic cleaning machine method is more than the conventional cleaning method, especially the surface of the workpiece is more complicated, such as some surface irregularities, mechanical parts with blind holes, some products with special requirements for cleanliness such as: watches And precision mechanical parts, electronic components, circuit board components, etc., using ultrasonic cleaning can achieve very good results.
超声波清洗机清洗效果好，清洁度高且全部工件清洁度一致。清洗速度快，提高生产效率，不须人手接触清洗液，安全可靠。对深孔、细缝和工件隐蔽处亦可清洗干净。对工件表面无损伤，节省溶剂、热能、工作场地和人工。
The mechanism of action of ultrasonic cleaning machines mainly has the following aspects:
超声波清洗机方式超过一般以的常规清洗方法，特别是工件的表面比较复杂，象一些表面凹凸不平，有盲孔的机械零部件，一些特别小而对清洁度有较高要求的产品如：钟表和精密机械的零件、电子元器件、电路板组件等，使用超声波清洗都能达到很理想的效果。
A strong shock wave is generated when the cavitation bubble is broken, and a part of the dirt layer is peeled off, dispersed, emulsified, and peeled off under the action of the shock wave. Because of the bubbles generated by the cavitation phenomenon, the gap between the dirt layer formed by the impact and the surface layer and the gap penetrates, because the small bubble and the sound pressure expand and contract simultaneously, the shrinkage, the physical force like peeling repeatedly acts on the dirt layer, the dirt The layers are peeled off and the bubbles continue to penetrate inward until the dirt layer is completely stripped.
超声波清洗机的作用机理主要有以下几个方面：
This is the secondary effect of cavitation. The impact of ultrasonic vibration of cleaning fluid on dirt in ultrasonic cleaning. Ultrasonic accelerated chemical cleaning agent dissolves the dirt, combines chemical and physical forces, and超声波清洗机 accelerates the cleaning process. 上一条:超声波清洗金属丝 下一条:超声波清洗机的适用范围 返回列表