超声波清洗机在使用中的注意事项介绍
超声波清洗机在使用中的注意事项介绍
(1) Ultrasonic cleaning machine power supply and heater power supply must have good grounding device.
超声波清洗机因为其独有的特点而被广泛应用于各个领域之中，并受到大家的一致称赞。但是大家在使用超声波清洗机的时候需要注意一些什么呢？本文就其使用中的一些注意事项，做出简单说明。
(2), the ultrasonic cleaning machine is strictly prohibited to start without cleaning liquid, that is, the cleaning cylinder does not add a certain amount of cleaning liquid, and the ultrasonic switch must not be opened.
⑴、超声波清洗机电源及加热器电源必须有良好接地装置。
(3) The cleaning equipment with heating equipment is strictly prohibited to open the heating switch when there is no liquid.
⑵、超声波清洗机严禁无清洗液开机，即清洗缸没有加一定数量的清洗液，不得开超声波开关。
(4) It is forbidden to hit the bottom of the cleaning cylinder with heavy objects (iron pieces) to avoid damage to the energy converter chip.
⑶、有加热设备的清洗设备严禁无液时打开加热开关。
(5), the ultrasonic generator power supply should be used alone 220V/50Hz power supply and equipped with more than 2000W regulator.
⑷、禁止用重物（铁件）撞击清洗缸缸底，以免能量转换器晶片受损。
(6) The bottom of the cleaning cylinder should be flushed regularly, and there should be no excessive impurities or dirt.
⑸、超声波发生器电源应单独使用一路220V/50Hz电源并配装2000W以上稳压器。
(7) When the ultrasonic cleaning machine changes the new liquid, it can be washed after the ultrasonic is started. ⑹、清洗缸缸底要定期冲洗，不得有过多的杂物或污垢。
⑺、超声波清洗机每次换新液时，待超声波起动后，方可洗件。